Bumper- Front

• Made In American And Texas Strong USA
• Brushed Stainless Steel

See All

• Ultra Light Weight Hybrid Bumper w/Tube And Plate Steel
• Sleek Aerodynamic Design
• Provides Optimal Tire Clearance
• Retains Factory Skid Plate
• Retains Adaptive Cruise Control And Park Assist
• Center Cutout For Rigid Industries 20 in. LED Light Bar
• The Fit Of The Bumper Is High And Tight
• Perfectly Follows The Vehicles Body Lines

See All

• Bold Stubby Bumper Profile Perfect For Off-Road
• Patented-Design Made From Stamped 11-Gauge Steel

See All

• Bold Stubby Bumper Profile Perfect For Off-Road
• Patented-Design Made From Stamped 11-Gauge Steel
• Massive 1 In. Thick Recovery Hooks w/Dual-Drilled Shackle Mounts
• Built-In Off-Road Jack Lifting Points
• Simple Bolt-On Installation

See All

• Angled Design Sits High To Maintain Maximum Ground Clearance And Approach Angles
• Winch Ready - Accepts Most WARN Mid-Frame Winches Up To 12000 lbs. [5443 Kg]
• Bumper Is Pull-Tested To 12000 lbs. Capacity To Ensure Optimal Performance While Winching
• Bumper Features Integrated Dual Light Ports To Mount Auxiliary Flood Or Spot Lights [Lights Not Included]
• Welded Recovery Points Ready For D-Shackles [Sold Separately]
• Bumper Accommodates Oversize Tires Allowing For Better Off-Road Performance
• Withstands Rigorous 408-Hour Salt Spray Testing Delivering Up To 2X Corrosion Protection
• Easy To Install - Pre-Drilled Bolt Holes And Cutouts Make It Easy To Mount A WARN Winch

See All

• Welded One-Piece Construction Uses Heavy 1/4 in. And 3/16 in. Thick Steel
• Integrated Winch Mounting Structure Provides Maximum Strength For The Toughest Pulls
• Bumpers Available With Or Without Two Styles Of Grille Guard Tubes
• Grille Guards Constructed Of Large Diameter Welded Steel Tubing For Maximum Durability
• Welded Eyelets For D-Shackles For Increased Recovery Options
• Bumper Features Integrated Light Ports For Four 3 in. Cube Lights

See All

• Full Replacement Bumper With Full Grill Guard
• Gloss Black Powder Coat
• Bolt-on Tow Hooks Included
• Light Mounts For Factory Fog Lights
• Optional Bolt-on Winch Mount
• Optional Bolt-on 1in. D-ring Mounts
• MADE IN THE USA

See All

• Full Replacement Bumper With Full Grill Guard
• Gloss Black Powder Coat
• Bolt-on Tow Hooks Included
• Light Mounts For Factory Fog Lights
• Optional Bolt-on Winch Mount
• Optional Bolt-on 1in. D-ring Mounts
• MADE IN THE USA

See All

• Full Replacement Bumper With Full Grill Guard
• Gloss Black Powder Coat
• Bolt-on Tow Hooks Included
• Light Mounts For Factory Fog Lights
• Optional Bolt-on Winch Mount
• Optional Bolt-on 1in. D-ring Mounts
• MADE IN THE USA

See All

• Full Replacement Bumper With Full Grill Guard
• Gloss Black Powder Coat
• Bolt-on Tow Hooks Included
• Light Mounts For Factory Fog Lights
• Optional Bolt-on Winch Mount
• Optional Bolt-on 1in. D-ring Mounts
• Optional Bolt-on 2in. Receiver
• MADE IN THE USA

See All

• Classic Rock Crawling Front Bumper

See All

• 100 Percent Made In Texas USA
• Standard Premium 5-Stage Satin Black Powder-Coat Finish
• Improves Approach Angle
• Employs Recovery Points Aligned To The Frame
• Fully Air Bag Compatible
• Engineered To Comply w/OE Frames Energy Absorbing Crumple Zones
• Designed In Cooperation w/OE Engineers
• Recessed Light Pods For 2 X 4-in. Diameter
• PIAA 510 / QuakeLED QFR199 Or Similar
• 2X PIAA 1100X Or Similar Provide Optimal Forward Beam Projection
• Winch Cavity Designed Around Warn M8000 / 9.5XP Or Similar Winch
• Combat Proven And Trusted By The United States Military

See All

• Full Replacement Bumper With Full Grill Guard
• Flat Black Powder Coat
• Bolt-on Tow Hooks Included
• Light Mounts For Factory Fog Lights
• Optional Bolt-on Winch Mount
• Optional Bolt-on 1in. D-ring Mounts
• Optional Bolt-on 2in. Receiver
• MADE IN THE USA

See All

• ELITE Front Guard Plate

See All

• Full Replacement Bumper w/Full Grill Guard
• Flat Black Powder Coat
• Bolt-on Tow Hooks Included
• Light Mounts For Factory Fog Lights
• Optional Bolt-on Winch Mount
• Optional Bolt-On 1 in. D-Ring Mounts
• Optional Bolt-On 2 in. Receiver
• MADE IN THE USA

See All

• Advanced Bumper Geometry Designed Specifically To Increase
• Approach Angles And Articulation
• Will Accommodate 37 in. Tires With Only 2 in. Lift
• Integrated Winch Mount Is Engineered And Tested
• For The High Stresses Of Winching/State Of The Art Flat Black
• Powdercoated Finish Features A Five Step Pretreatment Process
• With Zirconium Nanotechnology/Stands Up To 408 Hour Salt Spray
• Testing And Excellent UV Protection

See All

• Designed For Easy Bolt-On Mounting
• Supports Road Armor 12k Non-Integrated Winch Or Up To Warn M16.5
• Retain Factor Safety Measures While Armoring Your Path
• Multiple Light Mount Options
• 3/16 in. Steel Construction w/1/4 in. Winch Mount And Brackets
• Backed By Our Road Armor Quality Guarantee

See All

• 10-Stage Variable Valving
• Easy; Bolt-on Installation
• Can Be Easily Returned To Stock
• Incl. Winch Guard
• Incl. [2] Rough Country 2in Black Series Led Cubes
• Incl. [1] Rough Country
• 20 in. Black Series Single-row Led Light Bar
• Incl. [2] Heavy-duty D-rings
• Fits Rough Country Winches And Other Standard-sized Brands

See All

• FMJ Full Width Winch Bumper

See All

• FMJ Stubby Winch Bumper

See All

• Gloss Black
• Without Raiser
• Welded End Caps
• Limited 5 Year Warranty

See All

• UTV Front Bumper

See All

• Front Bumper Accessory

See All

• Easy To Install
• 11ga Powder Coated Steel
• 6 In. Slim Line Cree Leds
• 2880 Lumens
• 36 Watts
• Each Light Contains 6; 3 Watt High Intensity Cree Leds
• 90 Degree Flood Beam
• IP67 Waterproof Rating
• Durable Die Cast Aluminum Housing
• Moisture Breather Technology Reduces Build-Up Behind The Lens
• Includes Premium Flat-Wound Wiring Harness With On/Off Switch
• 3 Year Warranty

See All

• 10-Stage Variable Valving
• Aggressive Appearance.
• Recessed Winch Plate.
• Integrated Fog Light Mounts.
• Fog Mounts Work w/Factory Fog Lights.
• Durable Black Carbon Powdercoating.
• Gain More Tire Clearance And Achieve Better Approach Angles.
• Fairlead Mounts To The Outside Of The Bumper For Ease Of Use.
• Will Accommodate Most Winches On The Market.

See All

• 10-Stage Variable Valving
• Incl. [2] 2 in. Flush Mount Led Cubes - 2880-lumens/36W
• Light Bar Hoop W/20 In. Single Row Led Light Bar-7200-lumens/90W
• Led Lights Feature A Black Panel Design
• Led Lights Are Ip67 Waterproof Rated
• Built-In Winch Plate
• Incl. D-ring Set - 4.75-ton Capacity
• Laser-Cut RC Logo
• Satin Black Finish
• Bumper: Limited Lifetime Warranty
• Led Lights: 3-year Warranty

See All

• 10-Stage Variable Valving
• Aggressive Appearance
• Recessed Winch Plate
• Durable Black Carbon Powdercoating
• Gain More Tire Clearance And Achieve Better Approach Angles
• Fairlead Mounts To The Outside Of The Bumper For Ease Of Use

See All

• Gloss Black
• With Raiser
• Welded End Caps
• Limited 5 Year Warranty

See All

• 10-Stage Variable Valving
• Aggressive Appearance
• Recessed Winch Plate
• Durable Black Carbon Powdercoating
• Gain More Tire Clearance And Achieve Better Approach Angles
• Fairlead Mounts To The Outside Of The Bumper For Ease Of Use

See All

• Full Width Bumper
• Provides Greater Tire Clearance
• Winch Ready-Accepts Warn Zeon Winches
• Integrated D-Ring Mounts That Hold Up To 7/8 Shackle
• Side Vents And Large Mesh Insert For Optimal Air Flow
• Accommodates Most 20 Light Bar With Optional Insert

See All

• Stubby Bumper
• Provides Maximum Tire Clearance
• Winch Ready-Accepts Warn Zeon Winches
• Integrated D-Ring Mounts That Hold Up To 7/8 Shackle
• Side Vents And Large Mesh Insert For Optimal Air Flow
• Accommodates Most 20 Light Bar With Optional Insert

See All

• Provides Greater Tire Clearance
• Fully Customizable w/A 14 Piece Modular Design
• Strategically Placed Cutouts For Maximum Airflow
• Mounting Options For 2x2 in. Dually Lights To Max. Light Coverage
• Engineered To Work With Up To A 12000 lbs. Warn Zeon Winch
• 3/16 in. Steel Winch Tray
• MADE IN THE USA

See All

• Revolutionary Combination Of Both Grille And Winch Bumper
• Provides Greater Tire Clearance
• Strategically Placed Cutouts For Maximum Airflow
• Engineered To Work With Up To A 12000 Lbs Warn Zeon Winch
• Complete Bolt On Installation w/Stainless Steel Hardware
• MADE IN THE USA

See All

• Aggressive Design And Unique Styling
• Combines Both Grill And Bumper
• Side Mounting Slots And Tabs For Light Options
• Lower Cutout For Increased Airflow
• Provides Far More Tire Clearance

See All

• Removable Insert For Customization Options
• Aggressive Design

See All

• Bumper Is Designed Ultra Narrow
• Provide Maximum Tire Clearance
• Tapered Knife Edge Design
• Welded Inside And Out For Superior Strength
• Winch Ready Including WARN Power Plant

See All

• Protects Vehicle From Damage Against Wildlife And Road Debris
• Provides Added Safety To Driver And Vehicle
• Heavy Duty Diamond Plate Steel
• Honeycomb Mesh Protects Grille/Gives Maximum Airflow
• 1.5 in. Headlight Protection Tubes
• 2 in. Full Wraparound Wings Ties Into Bumper
• Provisions For Factory Parking Sensors
• 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
• Compatible For Factory Fog Lamps Or LED Post Mount Lights
• Custom Die Cast Riveted Logo Badge
• Mounting Provisions For License Plate
• Hardware Mounting Brackets Included

See All

• High-Strength Steel Construction
• Built-In Recessed Winch Plate Improves Airflow To Radiator

See All

• Easy To Install!
• Durable; Steel Construction
• Incl. [4] Rough Country Led Cubes
• Incl. 20in Rough Country Led Light Bar
• Incl. Bracket To Retain Adaptive Cruise Control
• Retains Factory Tow Hooks
• Retains Factory Proximity Sensors

See All

• M4M Series - Hidden Winch Mount w/No Guard [Winch Ready For A Warn Zeon 10]
• Sensor Compatible And Allows For Toyota Safety Sense Technology
• Accommodates A 20-inch Single Row LED Light Bar [Light Not Included]
• Made From 3/16th Inch US Steel Construction
• 2 Stage Matte Black Powder Coat w/Epoxy Primer
• 78 lbs. Weight
• 13.5 in. Height
• 50 in. Width
• 13 in. Depth
• MADE IN THE USA

See All

• Full Width Design
• Includes Modular Fog Light Mounts
• Includes [2] 2 in Black-Series Flush
• Mount LED Cubes 2880 Lumens/36 watts
• Incl. 20 in. Single-Row Black-Series LED Light Bar/7200 Lum/90w
• Cubes Are IP67 Waterproof Rated
• Includes D-Ring Set - 4.75 Ton Capacity
• Satin Black Finish

See All

• Lightweight Hybrid Front Bumper w/No Guard
• Sensor Compatible
• Allows For Toyota Safety Sense Technology
• Side Mounting Slots And Tabs For [3] RIGID SR-M Pro Series Pod Lights [912313] -Lights Not Included
• Holds [3] RIGID 4 in. Rounds Lights [Lights Not Included]
• Made From 11 Gauge US Steel Construction
• 2 Stage Matte Black Powder Coat w/Epoxy Primer
• 95-112 lbs. Weight
• 13-21.5 in. Height
• 75.5 in. Width
• 22.5 in. Depth
• MADE IN THE USA

See All

• Identity Jeep Front Bumper

See All

• Strong
• Made In Texas USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Square Light Ports For Led Cubes
• Raw Unfinished Steel

See All

• Truly Modular Design For Customization
• Interchangeable Light Pod Inserts
• Available Wide End Pods For Pocket Flares Heavy Line Trucks
• Optional Shackle Or Non-Shackle Mount Center Section Available
• Available Mesh And Trim Ring Inserts
• Integrated Adaptive Cruise Control And Parking Sensors
• Integrated 12 in. Accent Led Lighting
• Accent LED Lighting w/Preparatory Control Module
• Allows For Multitude Of Lighting Options
• Constructed From High Quality Steel
• Made In USA

See All

• Identity Front Bumper Shackles

See All

• 12000 Lumens
• 150 Watts
• Contains 30-5 Watt High Intensity Leds
• IP67 Waterproof Rating
• Durable Die Cast Aluminum Housing
• Includes Wiring Harness
• Length: 31.37 in.
• Depth: 3.12 in.
• Height: 1.6 in.
• Factory Appearance
• Brackets Mount Hidden Away From View
• Mounting Brackets Feature Lifetime Warranty

See All

• Easy To Install
• Durable Steel Construction
• Includes 4 Rough Country Led Cubes
• Includes 20 in. Rough Country Led Light Bar
• Retains Factory Tow Hooks
• Retains Factory Proximity Sensors

See All

• Easy To Install
• Looks Like Factory Equipment
• Durable Black Carbon Powdercoating
• Includes Lifetime Replacement Guarantee
• Each Light Contains 6-3 Watt High Intensity Cree Leds
• 9600 Lumens
• 120 Watts
• 8 Degree Spot / 90 Degree Flood Beam
• IP67 Waterproof Rating
• Chrome Panel Design
• Durable Die Cast Aluminum Housing
• Moisture Breather Reduces Moisture Build-Up Behind The Lends

See All

• 10-Stage Variable Valving
• Includes 20 In. Dual Or Single-Row Rough Country Led Light Bar
• Protects Vehicle From On And Off-Road Debris
• Includes D-Ring Set-4.75 Ton Capacity
• D-Ring Mounts Welded Inside And Out For Increased Strength
• Satin Black Finish

See All

• Winch Ready
• Integrated D-Ring Mounts And Tow Hooks
• Fab Fours Signature Injection Molded Light Housings
• 90mm Fog And 60mm Turn Indicator Lights Are Included
• Winch Delete Tray Included

See All

• Enhances the look while remaining lightweight
• 1in. D-Ring Mounts
• HELLA 90mm Fogs And 60mm Turns Included
• Signature Light Housings
• 9.5 Winch Ready
• Mounting Brackets And Hardware Included
• Lifetime Warranty On Structure
• 1 3/4in. OD Tube Grill Guard

See All

• Winch Ready-Accepts Up To 12000 lbs. Warn Zeon Winch
• 3/16 in. Steel Construction
• 140 lbs.
• Mounting Options For 2x2 in. Cube Lights To Maximum Led Coverage
• Front Bumper w/Provided Brackets That Tie Directly To The Frame
• MADE IN THE USA

See All

• Open Fender Front Bumper

See All

• Mount Kit Included
• 2 In. Diameter Tube Frame With 1.5 In. Diameter Center Tubes
• Integrated Mount For Two Single Or One Double Row 30 In. LED Bar
• Equipped With Mount Points For Optional Auxiliary Lighting
• Optional Outlaw Skid Plate Available. Sold Separately
• Optional Outlaw Led Light Kits Available. Sold Separately
• Round Led Light Kit w/Westin Auxiliary Lights Sold Separately
• Square Led Light Kit w/Hyper Auxiliary Lights Sold Separately

See All

• Black Powder Coated
• 1/4in. And 3/16in. Steel Construction
• Winch Mount For The WARN 16.5 Or Smaller
• 1in. D-Ring Mounts
• Mounting Brackets And Hardware Included
• HELLA 90mm Fog Lights And 60mm Turns Included
• Fully Welded Inside And Out
• Lifetime Warranty On Structure

See All

• 1/4in. And 3/16in. Steel Construction
• Winch Mount For The WARN 16.5 Or Smaller
• 1in. D-Ring Mounts
• Mounting Brackets And Hardware Included
• Fab Four 90mm Fog Lights And 60mm Turns Included
• Fully Welded Inside And Out
• Lifetime Warranty On Structure

See All

• Lightweight Design Reduce Shipping Cost w/o Sacrificing Strength
• Increases Ground Clearance And Angle Of Approach
• Constructed Of 10 Gauge Steel For Strength And Style
• Mesh Screen Allows Maximum Air Flow To Intercooler/Radiator Area
• Has Provisions For Factory Sensors - On Some Applications
• 10 Gauge Steel Valance Included - On Some Applications
• Valance Features Laser-Cut Westin Logo
• Bolt On Skid Plate Available - Sold Separately
• Compatible For Factory Tow Hooks - On Some Applications
• Outrigger Brackets Support Wings Of Bumper For Maximum Strength
• Hardware And Mounting Brackets Included
• E-Coated Base Coat Provides Long Lasting Corrosion Protection

See All

• Low Profile Design
• The OEM Bumper That Fits Most 8000-12000 Lbs Winch Models
• Accommodates Recessed Hawse Fairlead For Maximize Approach Angle
• Constructed Of 10 Gauge Steel For Strength And Style
• Heavy-Duty 4 Gauge Winch Mount Center Section
• Features Large Winch Access Holes For Easier Operation
• Provides Two Recovery Points For Shackles
• Configured To Accept Most Single Row 20 in. Led Light Bars
• Available In Two Bull Bar Styles/Round And Angular
• Hardware And Mounting Brackets Included
• E-Coated Base Coat Provides Long Lasting Corrosion Protection
• Available In Textured Black Finish

See All

• Low Profile Design
• The OEM Bumper That Fits Most 8000-12000 Lbs Winch Models
• Accommodates Recessed Hawse Fairlead For Maximize Approach Angle
• Constructed Of 10 Gauge Steel For Strength And Style
• Heavy-Duty 4 Gauge Winch Mount Center Section
• Features Large Winch Access Holes For Easier Operation
• Provides Two Recovery Points For Shackles
• Configured To Accept Most Single Row 20 in. Led Light Bars
• Available In Two Bull Bar Styles/Round And Angular
• Hardware And Mounting Brackets Included
• E-Coated Base Coat Provides Long Lasting Corrosion Protection
• Available In Textured Black Finish

See All

• Aggressive Design
• Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
• Perfectly Follows The Body Lines
• Side Mounting Slots And Tabs For Various Light Options
• Provides Far More Tire Clearance
• Integrated Shackle Mounts

See All

• Black
• Bumper only
• Stamped Steel
• Efficient Stamping Process Used
• Creates A Product Lighter Than Most Aftermarket Steel Bumpers
• Sturdy 11 Gauge Powder Coated Steel Construction

See All

• Spartan Front Bumper Bolt-On Accessory

See All

• Full Width Standard Ends Add An Aggressive Off-Road Look
• Black Textured Powder Coat Finish Resists Rust And Corrosion
• Incl. HD Winch Plate/D-Shackle Mounts/Stylized Overrider
• Direct Bolt-On Replacement/Maintains Factory Fog Lights
• Limited 5 Year Warranty

See All

• 11-Gauge Steel
• Formed To Fit The Contours Of Vehicle
• Press Broke
• Made In America

See All

• Made In America And Proudly Built In Texas
• 7-Gauge Steel
• Direct Bolt-On Design
• Textured Satin Black Powder Coat
• Lifetime Structural Warranty

See All

• Made In American And Texas Strong USA
• 11 Gauge Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Superior Foot Forward Winch Mount Fits WARN M8000 Or 9.5XP
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Raw Unfinished Steel

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Direct Bolt On Design
• Square Light Ports For Led Cubes
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Top Winch Mount w/Bolt On Fairlead
• Superior Foot Forward Winch Mount Fits Warn Power Plant
• Recessed Light Port For 10-in. LED Light Bar
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Superior Foot Forward Winch Mount
• Superior Foot Forward Winch Mount Fits Warn M12000/Smittybilt XRC
• Recessed Light Ports For Auxiliary Lighting
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In Texas USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Superior Foot Forward Winch Mount
• Superior Foot Forward Winch Mount Fits Warn M12000/Smittybilt XRC
• Recessed Light Ports For Auxiliary Lighting
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In Texas USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Superior Foot Forward Winch Mount
• Superior Foot Forward Winch Mount Fits Warn M12000/Smittybilt XRC
• Recessed Light Ports For Auxiliary Lighting
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Winch Ready
• Integrated D-Rings And Tow Hooks

See All

• Stubby Design For Maximum Tire Clearance
• Winch Ready
• Integrated Shackle Mounts
• Integrated 10 in. Dual Row Light Bar Mount
• Simple And Quick Installation

See All

• Full Width Design
• Includes Modular Fog Light Mounts
• Can Retain Factory Fog Lights If Desired
• LED Cubes Are IP67 Waterproof Rated
• Built-In Winch Plate
• Includes D-Ring Set - 4.75 Ton Capacity
• Laser-Cut RC Logo
• Satin Black Finish

See All

• Made In American And Texas Strong USA
• Schedule 40 Pipe For Center Structure
• 11 Gauge Shell w/1/4 in. Heavy Duty Mounting System
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Winch Plate Option Available
• Accommodates Factory Fog Lights Or Aftermarket Led Cubes
• Mounting Holes For License Plate
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In American And Texas Strong USA
• Winch Plate Bumper Accessory
• 1/4 in. Heavy Duty Steel Construction
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Heavy Duty Shelf For Winch
• Superior Foot Forward Winch Mount Fits Warn M12000/Smittybilt XRC
• Mounting Holes For License Plate
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Muscular Stamped Steel Construction
• Patented Design Features Sculpted Contours And Sweeping Arches
• Features Built-In Winch Plate/Massive 1-Inch Thick Recovery Hooks
• Octagonal Pockets Accept factory JL / JT Fog Lights
• Easy Bolt-on Installation

See All

• Light Weight
• Steel Construction
• Integrated 20 in. Light Bar Housing
• Mounting Options For Two 2 in. LED
• Lower Cut Offs For Better Air Flow
• Fits High And Tight

See All

• Winch Ready For The WARN Zeon 10
• Center Mount For Integrated 30 in. Light Bar
• Mounting Options On Each Side For Three 3X3 LED Cube Lights
• Integrated D-Ring Mounts Provides Far Greater Tire Clearance
• Made From 3/16 in. Steel Construction
• 2 Stage Matte Black Powder Coat With Epoxy Primer
• MADE IN THE USA

See All

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• Bumper Made Of 0.1875 in. Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points For Post Mount Square Lights
• Rock Light Mount Points On Lower Bumper Corners
• Bottom Frame Mount Prevents Bumper From Rotating
• 2 Off-Road Jack Points
• Bolt On Installation; No Drill Required
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• Textured Black
• Steel
• No Winch Mount or D-Rings
• Limited 5 Year Warranty

See All

• Textured Black
• Incl. XHD Frond Winch Bumper And D-Rings
• Incl. Over Rider Hoop And Standard Bumper Ends
• Modular Design
• Steel

See All

• Textured Black
• 2.5 in. Tubing
• Modular Design
• Bolt-on
• Limited 5 Year Warranty

See All

• High Strength And Lightweight Design
• Low Profile Winch Mount Improves Air Flow
• Integrated Lightweight 10-Gauge Steel Shell And 4-Gauge Steel Winch Tray Provides Superior Strength
• Features 4.5 in. X 10 in. Winch Mount Pattern
• Accommodates Most Winches Up To 12000 lbs Capacity
• Provides Two Recovery Points For Shackles
• Compatible With All Factory Sensors
• Hardware And Mounting Brackets Included
• E-Coated Base Coat Provides Long Lasting Corrosion Protection
• Available In Textured Black Finish

See All